CBE 16amp Battery Charger

CBE 16amp Battery Charger

£158.07 (inc VAT) £161.99NewCondition
This switching battery charger can automatically charge 12 V lead batteries (lead-acid-gel). The battery charger is protected against overheating and the 12 V outputs are protected...

...read more

    Loading... Loading stock details...

This switching battery charger can automatically charge 12 V lead batteries (lead-acid-gel). The battery charger is protected against overheating and the 12 V outputs are protected against possbile short circuits and polarity reversal.

The charging process takes place in four stages:

Maximum current battery charging until the charging voltage is reached. NOTE: the charging voltage can be reached only if the battery is fully efficient.
When the charging voltage is reached the battery charger continues to work at continuous voltage for 90 minutes (lead-acid batteries) or 8 hours (lead-gel batteries).
Continuous voltage maintenance at 13.8 V (gel batt.) or 13.5 V (acid batt.).
After 10 hours of maintenance the battery charger switches to the Stand-by position and charges again only if the battery voltage is lower than 13 V.
The switching high frequency technology allows to obtain excellent performances with limited weight and dimensions.


  • INPUT TECHNICAL DATA
  • Nominal voltage : 240 Vac ±10 %
  • Frequency : 50Hz
  • Maximum power : 250 W
  • Protection fuse : 2 A (5x20 glass)
  • Security on/off switch 230 V
  • OUTPUT TECHNICAL DATA
  • Maximum voltage : 14,3 Vdc (Lead-acid /Gel) - 14,1 Vdc (Lead-acid)
  • Maintenance voltage : 13,8 V (Lead-acid /Gel) - 13,5 V (Lead-acid)
  • Maximum current : 16 A
  • Charging line : IUoU
  • Battery type selector : Lead-acid / Gel
  • Short-circuit and polarity inversion protected 15 °C
  • Thermal protection : Yes
  • Mains signal : 12V 50mA
  • TECHNICAL DATA
  • Efficiency : 86%
  • Room temperature : 0 ÷ 50 °C
  • Ventilation : Forced, automatic changing regulation
  • Protection degree : IP 30
  • Mains connection : "mate-n-lock" 3 poles connector
  • Battery connection : "mate-n-lock" 4 poles connector
  • Case : Nylon + fiber glass, self-extinguishing
  • Dimensions : 180 x 140 x 85 mm
  • Weight : 1Kg

1 Customer Review on CBE 16amp Battery Charger

CBE Charger

by Luibeg (17 Oct 2009)
5 star review(5/5)
Excelent product ,had this unit fitted within an hour of delivery and is now working as it should
thank you
5 5
  Did you know we have been established and have been in the caravan and motorhome industry for over 50 years?