5 Technical Questions on the Straight coupler 5/16" compression
what is the correct fitting to use when connecting the gas line to a Truma e4000 heater
This would require a 8mm or 5/16" compression fitting, our ref 226861 or 226863. You must use copper pipe inside the vehicle.
I have a smev PI1262 hob & grill but no fitting or installation instructions. Are you able to email me them or tell me where I can get them? Neil
Sorry, do not have any fitting instructions but this is fairly straightforward. Hob would be fitted into a suitable cut aperture in a work surface while providing a metal box construction underneath to accept the heat from the grill. Connect to 8mm copper gas piping with a suitable straight connector such as our part 126861 (8mm equivalent)
Hi Tom. My campervan conversion came with a Smev 8000 series hob, connected to a nearby Camping Gaz bottle by an 800mm rubber hose. At the hob, the hose was simply pushed over the plain 8mm pipe and secured with a jubilee clip. I don't think this is safe! What is the safe way of making this connection? Is there an appropriate compression fitting? Thanks!
by Chris Beeson
Current regulations do not allow rubber tubing inside a vehicle except in a sealed gas box. You should have a straight connector 126861 at the cooker and then copper pipe, ref. 126552, to the cylinder. At the cylinder end of the copper pipe you will need a fulham nozzle part 125312. Make sure that the copper pipe is securely fixed to the wall of the vehicle. To meet current regulations the gas cylinder should be in a metal box sealed from the interior of the vehicle but with high and low level ventilation to the outside. It is normal to have a bulkhead nozzle through the wall of the box, part 148384.
hi id like to order some gas 8m pipe code 126552 and require a straight connector but don't know which one I would require , also on the other end I intend to put a Widney fire that I have but need the nut adapter to fit the 8m pipe on to the fire ,if you can help many thanks chris buxton
8mm and 5/16" connectors are compatible so the straight connector is our ref. 126861. At the other end of the pipe you will require nut 150102 and olive 131428.
Hi,i i have a SMEV Series 8000 2-Burner Build-In Hob and Black Glass Lid with piezo Ignition and i am wanting to know what pipe i use to connect to my gas bottle
From the hob you must use 8mm (5/16") copper pipe to the gas compartment. In the gas compartment you will have a 5/16" gas nozzle to connect to the regulator on the gas bottle via a short length of 8mm rubber gas hose suitably clamped at both ends.
1 Customer Review on Straight coupler 5/16" compression
by Ms Thompson (12 Oct 2010)
Did you know we have been established and have been in the caravan and motorhome industry for over 50 years?
Low Rate CreditAvailable on 12, 18, 24 or 36 month terms. Spread the cost of your purchase with a low rate 14.9% fixed rate APR.
Leisureshopdirect Ltd is an introducer of regulated credit products provided exclusively by Close Brothers Retail Finance. Close Brothers Retail Finance is a trading name of Close Brothers Limited. Finance is only available to permanent UK residents aged between 18-75, subject to status, terms and conditions apply.
For further information, please visit our finance page: Finance Page Examples
The below example takes just the value of this product. There may be further costs such as shipping which have not been taken into account. To see a final figure please continue to checkout.
As you are an international customer, we can't calculate your shipping price automatically. You will notice that it has defaulted to £1000.
Please click the 'Send Shipping Request' button below and we will then work out the shipping cost and email you a link that will allow you to pay securely for the complete order. This usually takes much less than one working day.