Thermocouple for Rear Hob - Spade Fitting - Spinflo Cookers image 1

Thermocouple for Rear Hob - Spade Fitting - Spinflo Cookers

£16.88 (inc VAT) £20.99NewCondition
Thermocouple for Rear Hob - Spade Fitting - Spinflo Cooker. 250mm....

...read more

    Loading... Loading stock details...

Thermocouple for Rear Hob - Spade Fitting - Spinflo Cooker. 250mm.

1 Technical Question on the Thermocouple for Rear Hob - Spade Fitting - Spinflo Cookers

Question

I have an Enigma 600 OH46000 cooker and need a front left small burner thermocouple. Can't find a ref in your listings. Please help.
 on 

Answer

This will be either our part 240044 (length 250mm) or 256144 (length 320mm)..

2 Customer Reviews on Thermocouple for Rear Hob - Spade Fitting - Spinflo Cookers

Hob Thermocouple

by Mr Jones (17 Jun 2017)
5 star review(5/5)
Rear burner on hob would not remain lit. After looking on the web decided to replace the thermocouple. Once the hob is dismantled, and it's not the easiest thing to do,thermocouple is a doddle to replace. Unfortunately my problem turned out to be the switch for the cutoff when the lid is shut.
5 5

Easy To Fit

by Mr Hayes (22 Oct 2015)
5 star review(5/5)
Easy to fit in that you unclip the old unit from the power source and push on the spade clip on the new unit. You just need to then undo the nut holding the old thermocouple and transfer it to the new one, and tighten unit place. The hardest part is actually being able to get to do it. If you have a Bailey Orion and need to remove the drawer, look underneath and hopefully you will see two white plastic clips about 5 cm in length. Push on these and the drawer should just pop up off the rails. Don't bother asking Bailey, they are most unhelpful!
5 5
  Did you know we have been established and have been in the caravan and motorhome industry for over 50 years?