| |
|
|
Burner module for Carver Cascade 2 water heater
Replacement burner plus control module for Cascade II / Rapide water heater. Genuine Carver replacement part. Fits ALL Carver Cascade water heaters. THIS PRODUCT IS BEING DISCONTINUED. AVAILABLE WHIL..... MORE >>
|
|
|
| |
|
|
Carver Truma O-Ring for cascade drain plug
Carver Truma O-ring seal for cascade drain plug newer type. Pack of 2.
|
|
|
| |
|
|
Cold water inlet and non return valve for Carver Water heater
Cold water inlet and non return valve for Carver Water heater. Situated at bottom right hand corner when looking at rear of heater. CURRENTLY AVAILABLE WHILST STOCKS LAST.
|
|
|
| |
|
|
Drain plug - newer type for Carver Water Heater
Drain plug - newer type for Carver Water Heater with sealing 'O' ring. Cascade 2 Heater. From 1988.
|
|
|
| |
|
|
Flue cover - Ivory for Carver Water Heater
Flue cover - Ivory for Carver Water Heater
|
|
|
| |
|
|
HENRY Water heater for carver GE
Henry water heater. New replacement for the carver cascade water heater. 9 litres of hot water can be kept at 70 c, enough to power a shower or family washing and can be warmed up to temperatur..... MORE >>
|
|
|
| |
|
|
Hot water outlet fitting Carver Water Heaters
Hot water outlet fitting Carver Water Heaters. Fitted at top right hand corner when looking at the rear of the heater. Includes rubber grommet.
|
|
|
| |
|
|
Over temperature switch for Carver Water Heater
Over temperature switch for Carver Water Heater. Red button will 'pop out' if water temperature gets too hot when being heated electrically. Depress button to re-set. Fits the Carver Cascade 2 Water ..... MORE >>
|
|
|
| |
|
|
Safety valve with fast drain feature Carver Water Heater
Safety valve with fast drain feature Carver Water Heater and sealing ring. This safety valve will fit the Carver Cascade II.
|
|
|
| |
|
|
Thermostat for electric heater Carver Water Heater
Thermostat for Carver Water Heater. Fitted to electric element to control water temperature. Fits the Carver Cascade 2 Water Heater.
|
|
|
| |
|
|
Tie Rod 12mm thread both ends Carver Water Heater
Tie Rod 12mm with thread both ends for Carver Water Heaters. Ties water tank to heat exchanger. Overall length 420mm
|
|
|
| |
|
|
Wall switch Carver Cascade Rapide
Wall switch Carver Cascade Rapide. Push button operation.
|
|
|
| |
|
|
Wiring loom with Molex connectors
Wiring loom with Molex connectors. Connects water heater to wall switch.
|
|
|
| |
|
|
Burner module for Henry water heater
Burner module for Henry water heater
|
|
|
| |
|
|
Nut, washer and seal for tie bar for Carver Water Heaters
Nut, washer and seal for tie bar for Carver Water Heaters. Normally replaced if removing tank. ONLY AVAILABLE WHILST STOCKS LAST
|
|
Price: Discontinued
|
Product Ref: 119479  (1 review)
|
Delivery unavailable - Discontinued
|
Price Match unavailable - Discontinued
|
|
|
|
|
|
| |
|
|
Seal for tie rod for Carver Cascade 2
Seal for tie rod for Carver Cascade 2
|
|
Price: Discontinued
|
Product Ref: 139058  (No reviews)
|
Delivery unavailable - Discontinued
|
Price Match unavailable - Discontinued
|
|
|
|
|
|