Bulkhead and Tank Fittings


Bulkhead and Tank Fittings. Through wall fittings for bulkheads and water tanks

Product Ref: 227848
Bulkhead fitting straight 1/2" hose
 (1 review) (1 review)

Bulkhead fitting straight 1/2" hose

Bulkhead fitting straight 1/2" hose allows supply to be taken through

Bulkhead fitting straight 1/2" hose allows supply to be taken through bulkhead or any wall less than 10mm thick

£4.62 (inc VAT)  £5.74
Product Ref: 138087

Drain tap for freshwater tank

Complete with washer and backnut. Colur blue for freshwater. Hole requ

Complete with washer and backnut. Colur blue for freshwater. Hole required in tank 27mm dia.

£5.61 (inc VAT)  £6.09
Product Ref: 227849
Bulkhead fitting elbow 1/2" hose
 (1 review) (1 review)

Bulkhead fitting elbow 1/2" hose

Bulkhead fitting elbow 1/2" hose allows supply to be taken through bul

Bulkhead fitting elbow 1/2" hose allows supply to be taken through bulkhead or any wall less than 10mm thick

£4.83 (inc VAT)  £6.02
Product Ref: 230002

John Guest Bulkhead Connector 12mm push fit

John Guest. 12mm tube. The body is produced in acetal copolymer, 'O'R

John Guest. 12mm tube. The body is produced in acetal copolymer, 'O'Rings are nitrile rubber, The collet is produced in acetal copolymer with stainless steel teeth, The bulkhead nut is produced in brass

£3.25 (inc VAT)  £3.77
Product Ref: 230431
In line tap for 1/2" hose
 (2 reviews) (2 reviews)

In line tap for 1/2" hose

In line tap for 1/2" hose used in flexible hose supply to isolate part

In line tap for 1/2" hose used in flexible hose supply to isolate part of system if required.

£4.82 (inc VAT)  £7.41
Product Ref: 239570

40mm straight tank connector

Straight tank fitting to accept 40mm piping.

Straight tank fitting to accept 40mm piping.

£6.75 (inc VAT)  £7.77
Product Ref: 233365

Tank Fitting 3/4" straight

20mm hose nozzle to 1/2" BSP male parallel thread. Supplied with washe

20mm hose nozzle to 1/2" BSP male parallel thread. Supplied with washer and back-nut. Hole of 22mm diameter required in tank to fit

£3.97 (inc VAT)  £4.39
Product Ref: 231446
Tank fitting elbow for 1/2" hose
 (1 review) (1 review)

Tank fitting elbow for 1/2" hose

Outlet fitting for 1/2" hose. Often used as an overflow connection. Bu

Outlet fitting for 1/2" hose. Often used as an overflow connection. Bulkhead fitting with backnut and seal. Hole in the tank (threaded section) is 20mm.

£4.26 (inc VAT)  £4.93

Viewing products related to Bulkhead and Tank Fittings