Fiamma Tube Pro Table Leg 70cm

Name: Fiamma Tube Pro Table Leg 70cm
Brand: Fiamma
SKU: 290662
Price: 23.49 GBP
Availability: BackOrder

Product Ref: 290662
Fiamma Code : 06375A01-

£23.49(inc VAT) £32.99Product Ref: 290662
Fiamma Code : 06375A01-

View delivery optionsView product description

Delivery : £9.99
Loading stock details...

Only £84.68
Save £4.45

+Add Bundle

Discount Bundles Available

Product Description

The Fiamma Tube Pro Table Leg (part number 06375A01-) is the central component of Fiamma's modular table system for caravans, motorhomes, campervans, and boats. Made from anodised aluminium, it measures 70cm in length with a 5.5cm tube diameter and comes supplied with two tapered plastic caps pre-fitted to each end. The anodised finish gives the leg an oxidised effect that adds extra resistance to general wear. The leg slots directly into any of the Fiamma Table System bases using those tapered caps, making the whole setup quick to assemble and take apart. Part of a wider modular system, the Tube Pro forms the spine of a dismountable and revolving table arrangement that works both inside and outside.

How does the Fiamma Tube Pro work with the rest of the table system?

The Fiamma Tube Pro is 70cm long and 55mm in diameter, and its two tapered plastic end caps slot into any Fiamma Table System base: the Conic Connection, the Recessed Connection, or the Tripod Pro. The recessed connection sits flush to the floor. The Tripod Pro frees the table for outdoor use. The leg can be cut down to your required height before fitting.

Because the leg can be cut to suit, it works across a range of interior heights and seating configurations. If you're fitting it with the Recessed Connection (C0331-01-), the base sits flush with the floor when in use and takes a plastic cap (02411-01B) to cover the hole when the leg is removed. The Conic Connection (C5063-01-) is the above-floor option, screwed to the floor with self-tapping screws for a slightly raised profile. Both connections are made from aluminium and come with the screws required. For outdoor dining, adding the Tripod Pro base (06362-01-) lets you pick up the entire table and take it outside without needing a second table. The optional Adapter Tube Pro (98655-605) uses a pair of wall brackets and Velcro straps to store the leg against a bulkhead or inside a cupboard when not in use.

This is a widely used replacement and upgrade component across the caravan and motorhome industry. It's the right part for anyone building a new campervan table setup from scratch, replacing a worn or damaged leg, or looking to add a second Tube Pro to a system that already has a floor base installed. The 70cm starting length covers standard interior dining height, and cutting it down is straightforward with a hacksaw. The 0.7kg weight keeps it light for van builds where every gram matters, and the anodised aluminium holds up to the damp and condensation that's part of life in a leisure vehicle.

Associated Products

Quick View

Fiamma Above Floor Base for Table Legs - Conic Connection

Quick View

Fiamma Table Tripod Pro Base

Quick View

Fiamma Recessed Base Plug for Tables

Quick View

Fiamma Adaptor for Tube Pro 70 (98655-605)

Quick View

Fiamma Recessed Floor Base for Table Leg

Frequently Asked Questions

What is the Fiamma Tube Pro and what part number does it have?

The Fiamma Tube Pro (part number 06375A01-) is a 70cm anodised aluminium table leg with a 55mm tube diameter. It forms the main support column of the Fiamma modular Table System, designed for use in caravans, motorhomes, campervans, and boats. The leg is supplied with two tapered plastic end caps and is compatible with all Fiamma Table System bases.

Can the Fiamma Tube Pro table leg be cut to a shorter length?

Yes. The Tube Pro is 70cm long and can be cut down with a hacksaw to your required table height. This makes it suitable for a range of interior configurations and seating heights. The final table height also depends on which base connection is used: a recessed floor connection sits flush and gives a slightly lower table height than a conic above-floor connection or the Tripod Pro.

Which bases is the Fiamma Tube Pro compatible with?

The Tube Pro works with three Fiamma Table System bases: the Conic Connection (C5063-01-) which sits above the floor, the Recessed Connection (C0331-01-) which sits flush with the floor, and the Tripod Pro (06362-01-) which is a freestanding base for outdoor use. All three bases accept the tapered plastic end caps that come fitted to the Tube Pro.

How do I store the Fiamma Tube Pro when it's not in use?

The optional Fiamma Adapter Tube Pro (part number 98655-605) is a wall-mounting accessory that includes two brackets and Velcro straps. It secures the Tube Pro to a bulkhead, the inside of a cupboard door, or the underside of a worktop. When using the Recessed Connection floor base, the open floor socket is covered with the Fiamma plastic cap (02411-01B) once the leg is removed.

Can the Fiamma Tube Pro be used outdoors?

Yes. The Tube Pro is made from anodised aluminium, which resists corrosion and handles wet conditions without rusting. By removing the leg from the indoor floor base and slotting it into the Fiamma Tripod Pro (06362-01-), you can use the same table outside on a campsite, in an awning, or alongside your motorhome or caravan. The Tripod Pro is made from UV-resistant plastic and folds to 41cm x 8cm for storage.

Does the Fiamma Tube Pro table leg include the floor base or table top?

No. The Tube Pro is the leg only. The Conic Connection (C5063-01-), Recessed Connection (C0331-01-), Tripod Pro (06362-01-), floor cap (02411-01B), and Adapter Tube Pro (98655-605) are all sold separately as part of the wider Fiamma Table System. A table top is also purchased separately. This modular approach allows each component to be bought individually or replaced as needed.

What are the key specifications of the Fiamma Tube Pro table leg?

The Fiamma Tube Pro (06375A01-) is 70cm long with a 55mm (5.5cm) tube diameter. It weighs 0.7kg and is constructed from anodised aluminium with an oxidised finish for added resistance. Two tapered plastic end caps are included and pre-fitted. The leg can be cut to a shorter length using a hacksaw to achieve the required table height for a specific vehicle interior.

EAN-13 : 8004815414702

Seen this product cheaper? We will do our best to match it!

Click Here

Seen this product cheaper? We will do our best to match it!

Click Here

Reviews

Videos

Exploded Diagrams

Instructions

Delivery Options

Returning an Item

If you’ve changed your mind about keeping your purchase, please return it in its original condition with proof of purchase and we’ll exchange or refund it. Unless faulty, this should be within 100 days of receiving your order. By original condition, we’d expect this to mean that you’ve kept packaging and labels, and that the item is undamaged and unused.

For further information of how to return your item, please visit the "Returning an Unwanted/Faulty/Damaged Item" section on our Help Page.