Truma Grille for Eezy Heater image 1 Truma Grille for Eezy Heater image 2

Truma Grille for Eezy Heater

£22.99(inc VAT) £25.99
View delivery optionsView product description
  Product Description
The Truma Grille for Eezy Heater is a replacement outlet cover designed for caravan and motorhome owners who run their Truma Eezy heater without a hot air distribution system. When you're not using ducting to spread warm air throughout your vehicle, this grille covers the heater's air outlet to maintain safe operation and proper airflow. It's a straightforward component but an essential one if you want to run the Eezy heater in standalone mode for direct heating. The part also fits certain Truma S-Series models, including the S3004 and S5004, making it a versatile addition to your heating spares kit.

Installation is simple and doesn't require specialist knowledge. The grille slots into place over the outlet opening, allowing your 1800W electric heater to function correctly without the complexity of a full warm air system. This makes it particularly useful for smaller campervans, panel vans, or caravans where space is tight and a full ducting setup isn't practical or desirable. Many owners prefer this simpler heating setup when they're on short trips or when heating a compact living space where direct warmth is sufficient.

One thing to note is that without a distribution system, you won't get even heat spread throughout your vehicle - warmth stays concentrated near the heater itself. This grille is a genuine Truma component, so you're getting the correct fit and safety standards the manufacturer intended. It's worth keeping as a spare if you switch between ducted and non-ducted heating setups, or as a replacement if your original grille gets damaged. For anyone running a Truma Eezy or compatible S-Series heater in standalone mode, this isn't an optional extra - it's a required safety component.

Truma Grille for Eezy Heater Features


  • Compatible with Truma Eezy and S3004/S5004 heater models
  • Covers air outlet when hot air distribution not in use
  • Maintains safe operation in standalone heating mode
  • Genuine Truma replacement component
  • Simple installation with no specialist tools required

Specifications
  • Application : Truma Eezy, S3004, S5004 heaters
  • Function : Air outlet cover for non-ducted operation
  • Heater capacity : Works with 1800W Eezy electric heater
  • Power requirement : None (passive component)
  • Installation type : Direct fit replacement grille

Frequently Asked Questions

Is it possible to use the Eezy without warm air distribution?
Yes, the Eezy can be used without a warm air distributor or warm air duct. If a pipe is not connected to the warm air outlet of the heater, a grille must be placed on top for protection against intrusion. This grille ensures safe operation when running the heater in standalone mode, providing direct heating without the need for ducting throughout your vehicle. The grille is an essential safety component when operating without warm air distribution.
What is the Truma Grille for Eezy Heater used for?
The grille covers the air outlet on your Truma Eezy heater when you're not using a hot air distribution system. It allows the heater to operate safely in standalone mode, providing direct heat without ducting. Without this grille fitted, running the heater in non-ducted mode compromises airflow and safety standards. The component maintains proper ventilation around the heating element whilst protecting the outlet opening from debris or accidental contact.
Is this grille compatible with all Truma heaters?
No, this grille is specifically designed for the Truma Eezy electric heater and is also compatible with certain S-Series models, namely the S3004 and S5004. It won't fit other Truma heating systems such as the Combi or VarioHeat ranges, which have different outlet configurations and dimensions. Always check your heater model before ordering to confirm compatibility, as Truma manufactures various heating systems with different specifications and mounting requirements across their product range.
How do I install the Truma Eezy heater grille?
Installation is straightforward and doesn't require specialist tools or technical expertise. The grille fits directly over the heater's air outlet opening and secures in place according to Truma's standard mounting system. Before fitting, make sure the heater is switched off and cooled down completely. Remove any existing grille or ducting connection, then position the new grille over the outlet and secure it using the manufacturer's fixing method. Always consult your Truma Eezy installation manual for model-specific fitting instructions, as there are slight variations between heater versions.
Do I need this grille if I have a hot air distribution system installed?
No, if your Truma Eezy heater is connected to a hot air distribution system with ducting, you don't need this grille fitted. The ducting connection replaces the grille and directs warm air throughout your caravan or motorhome. However, it's sensible to keep one as a spare if you ever remove the ducting system or if you switch between ducted and non-ducted setups depending on the season or vehicle usage. Some owners prefer direct heating in smaller vehicles and ducted heating in larger layouts, making the grille a useful component to have available.
Will the Truma Eezy heater work without the grille fitted?
Running the Truma Eezy heater without either the grille or a ducting connection fitted compromises safe operation and isn't recommended by the manufacturer. The outlet needs to be properly covered to maintain correct airflow dynamics around the heating element and to meet safety standards for recreational vehicle heating systems. Operating the heater with an open outlet creates potential hazards including improper ventilation, reduced heating efficiency, and the risk of foreign objects entering the heater assembly. Always fit either the grille for standalone use or connect proper ducting before operating your Eezy heater.
What's the difference between using the grille and hot air ducting?
The grille allows your Truma Eezy to provide direct, localised heating from the heater unit itself, which works well in compact spaces like small campervans or when you're heating a single area. Hot air ducting distributes the 1800W heating output throughout your vehicle via vents in multiple rooms, giving more even temperature distribution in larger caravans and motorhomes. The grille setup is simpler with no installation complexity, whilst ducting requires planning vent positions and running pipes through your vehicle's structure. Both configurations are approved by Truma but serve different heating needs depending on your vehicle size and layout preferences.
EAN-13 : 4052816035437
  Loading...
If you’ve changed your mind about keeping your purchase, please return it in its original condition with proof of purchase and we’ll exchange or refund it. Unless faulty, this should be within 100 days of receiving your order. By original condition, we’d expect this to mean that you’ve kept packaging and labels, and that the item is undamaged and unused.

For further information of how to return your item, please visit the "Returning an Unwanted/Faulty/Damaged Item" section on our Help Page.
  Did you know we have been established and have been in the caravan and motorhome industry for over 50 years?

RELATED PRODUCTS

Trustpilot

SUPPORT

GET IN TOUCH

Please visit the help page or email us

orders@leisureshopdirect.com

HELP

HELP

INFORMATION

MY ACCOUNT