The Isabella Shade Side Left transforms your campervan's wind out canopy into a sheltered outdoor room by adding a dedicated side panel with a large viewing window. This left-mounted version attaches directly to your vehicle using three industrial-grade suction cups, creating a draught-proof seal that blocks wind while maintaining visibility through the generously sized window panel. The 186 x 185 cm panel fits canopies with 200 cm depth and minimum 260 cm width, making it compatible with popular campervans including VW California, Mercedes Marco Polo, Ford Nugget and Renault Space Nomad models.
Built from IsaLite 195 g/m2 coated polyester with a PVC base weighing 350 g/m2, the panel withstands prolonged UV exposure and repels water without adding excessive weight to your setup. The CarbonX roof pole combines carbon fibre strength with telescopic adjustment and Isabella's IsaFix locking bracket, letting you tension the frame in seconds without tools. Rubber end brackets prevent wind displacement during gusty conditions, while the included tent pegs provide ground anchoring for additional stability. You can reposition the roof pole to the centre of your canopy if you're combining this with the Van Front panel to create two separate rooms.
The suction cup mounting system means you're not drilling into your campervan or dealing with figure-of-eight rail systems that require permanent modifications. The window balances privacy with natural light and outward views, avoiding the closed-in feeling of solid panels. One consideration is that the suction cups need clean, smooth surfaces to maintain their seal, so older campervans with textured or oxidised paintwork may require surface preparation before installation. Regular maintenance involves vacuuming when dry, occasional Aquatex treatment for the windows, and IsaClean for deeper cleaning when needed.
Isabella Van Side Left Features
- Dimensions (width x height): 186 x 185 cm
- Side panel with window for shelter, privacy and visibility
- Water-repellent and UV-resistant material
- Durable coated polyester fabric
- Available in 2 versions for mounting on the right side (with door) or left side of your wind out canopy
- Fits wind out canopies that are 200 cm in depth and minimum 260 cm in width
- Compatible with: VW California, Mercedes Marco Polo, Ford Nugget, Ford Nugget Plus, Renault Space Nomad and Nissan Primastar Seaside
Frequently Asked Questions
The right side version includes a zipped door for entry and exit, while the left side version is a solid panel with only the viewing window. Choose based on which side of your campervan you want access from when standing under the canopy. Most campervan owners fit the right side with door on the passenger side and use the left side panel on the driver's side for extra shelter without creating another entry point.
The three industrial-grade suction cups create a secure seal on smooth painted surfaces and work effectively in normal camping conditions when properly attached. The included tent pegs and rubber-bracketed roof pole provide additional stability against wind. Clean the mounting area thoroughly before installation and check the suction cups remain fully seated. For exposed coastal sites or overnight storms, take the panel down as you would with any wind out canopy accessory to prevent potential damage.
Yes, the Shade Side Left works with any brand of wind out canopy as long as your canopy measures 200 cm in depth and at least 260 cm in width. The suction cup mounting attaches to your campervan body rather than the canopy itself, and the telescopic CarbonX pole adjusts to fit your specific canopy dimensions. Check your canopy measurements before ordering because narrower or shallower canopies won't provide enough coverage for the 186 x 185 cm panel dimensions.
Vacuum or brush the panel when dry to remove loose dirt and debris, then wipe with a damp cloth for regular cleaning. For the window, spray Aquatex reproofer sparingly and wipe immediately with a dry cloth, limiting this to twice yearly to maintain visibility without residue buildup. When deeper cleaning is needed, use Isabella IsaClean cleaning solution on the fabric panels followed by Aquatex reproofing treatment to restore water repellency. Never pack the panel away wet as this encourages mildew growth on the coated polyester material.
Isabella specifically lists compatibility with VW California, Mercedes Marco Polo, Ford Nugget, Ford Nugget Plus, Renault Space Nomad and Nissan Primastar Seaside. Any campervan with a wind out canopy measuring 200 cm depth and minimum 260 cm width will work, regardless of make or model. The critical requirement is smooth painted surfaces for the suction cup mounting rather than textured or heavily oxidised panels which won't create a proper seal.
Combining the Shade Side Left with Isabella Van Front creates a completely enclosed outdoor room under your wind out canopy. The left side panel provides shelter on one side, while Van Front closes off the front opening, giving you a weatherproof space attached to your campervan. You can reposition the CarbonX roof pole to the centre of your canopy when using both panels together, effectively creating two separate rooms if needed. The right side with door remains open for access unless you add that panel separately.
Installation takes approximately 5-10 minutes once you understand the system. Press the three suction cups firmly against your campervan side, extend the telescopic CarbonX roof pole to the correct length, lock it using the IsaFix bracket, and secure the bottom with included tent pegs. Removal reverses this process with a quick release of suction cups and pole disconnection. The lightweight IsaLite 195 g/m2 material makes handling easier than heavier canvas panels, and the system requires no tools for setup or breakdown.
IsaFix is Isabella's proprietary quick-lock system for tensioning the telescopic CarbonX roof pole without tools or complex adjustments. Extend the pole to your required length, engage the IsaFix bracket with a simple locking action, and the pole maintains tension against your canopy frame. This eliminates the twisting collar systems found on cheaper poles that loosen over time or require significant hand strength to operate. The carbon fibre construction means the pole stays rigid under tension while weighing considerably less than aluminium alternatives.
(11 reviews)
(14 reviews)
Loading shipping details...
-90450_xlge.jpg)
-42857_xlge.jpg)
