Question

Hi, i Have a Thetford 200CWE In My Elddis Crusader 2008, 1st Changed The Switch Just 6 Months Ago Due To It Not Working At All. That Sorted a Few Weeks Ago The Flush Was Intermittent And Slow/Reduced Water Flow, The Old Pump Was Removed And a New Pump Fitted But When The Switch Is Activated There Is Nothing Only The Click Of The Switch. The Pump Does Not Run. There Is Current To The Wiring To The Pump And To The Switch, The Fuse Is Good, And The Battery Shows That It Is Ok And Charging Well. The Pump Has Been Tested On a 12v Battery And It Whizzed Round, Could You Throw Any Light On This Pls. It Seams To Make No Sense As All Was Ok All But Sluggish Then As Soon As The Wiring Was Cut To Attach New Pump It Wont Work. Is There Something i'm Missing ?? Help ....... :-)

Answer

I Think That The First Thing To Do Is To By-Pass The Switch By Connecting Together The Two Wires Leading To The Switch. If The Pump Runs Then You Have a Faulty Switch And I Would Suggest Replacing This With The Updated Version, Our Ref. 237090.