2 Technical Questions on the Re-inforced 1/2" red hot water hose
I wish to order a reich deluxe mixer tap to replace the one in my 1994 Autosleeper Executive. I would like to order hot & cold hose as the hoses are worn. What size hose do I need to order? Also what is a microswitch for?, our current tap has no microswitch?
by Juliet Cryer
The hose that you require is part 107538 (hot) and 127828 (cold). The microswitch is used to start the pump if the system does not include a pressure switch. You will have a pressure switch in your system so the microswitch can be ignored and the wires left unconnected.
Hi I am looking on your site for 1/2 inch reinforced water hose. I can find the cold water but not the hot do you stock both? Also I am converting a panel van and was wondering what water pump you would recommend using? Regards Wayne.
Yes we do. The hot water hose is our ref 107538. With regard to the water pump we would suggest the Shurflo Trailking 7, our ref. 127889.
1 Customer Review on Re-inforced 1/2" red hot water hose
Hot Water Pipe
by Mr FORRESTER (28 Nov 2013)
A good buy, nice and flexible when warmed in hot water and not to bad when cold
Did you know we have been established and have been in the caravan and motorhome industry for over 50 years?
As you are an international customer, we can't calculate your shipping price automatically. You will notice that it has defaulted to £1000.
Please click the 'Send Shipping Request' button below and we will then work out the shipping cost and email you a link that will allow you to pay securely for the complete order. This usually takes much less than one working day.