Instructions

Thule VeloSwing Precut Bumper (With Parking Sensors)

£279.99(inc VAT) £350.00
View delivery optionsView product description
  Product Description
The Thule VeloSwing Precut Bumper (302066) is the parking sensor variant of the dedicated replacement rear bumper for vans fitted with the Thule VeloSwing swing-out towbar system. It replaces the original factory bumper on your van, and because it comes pre-cut to the exact profile needed by the VeloSwing, fitting the towbar assembly becomes a much more straightforward job. The finish is clean and factory-looking once installed, with none of the tell-tale gaps or mismatches you'd get from cutting a standard bumper by hand. It's available in black to match the VeloSwing unit itself.

Which vans is the Thule VeloSwing Precut Bumper (302066) compatible with?


The 302066 is designed for the Fiat Ducato, Peugeot Boxer and Citroën Jumper from 2006 onwards, the Opel Movano from 2022 onwards, and the Toyota Proace Max from 2024 onwards. This specific model (302066) is the version for vans equipped with rear parking sensors. If your van does not have parking sensors, you'll need part number 302065 instead.

This bumper is specifically for owners who want the VeloSwing to look like an integrated part of the vehicle rather than a bolt-on afterthought. Motorhome owners, campervan converters and anyone using a Ducato-based van as a leisure vehicle will recognise how much cleaner the rear end looks with the precut bumper in place compared to the standard item. The cut-out profile is sized and positioned to accept the VeloSwing unit correctly, which also makes the physical installation process faster. Installation uses a TX30 screwdriver and the bumper ships with all necessary fixings. Thule manufactures this component in Belgium.

The 302066 accommodates the sensor apertures needed to keep your parking sensors fully functional after fitting, so there's no need to disable or remove them. The bumper sits flush against the body and gives the whole rear end a consistent, finished appearance. If you're building out a van for cycling trips or regular leisure travel, this is the accessory that takes the VeloSwing from a functional tool to a properly integrated system.

Thule VeloSwing Precut Bumper (With Parking Sensors) Features


  • For a premium, integrated finish : Replaces existing bumper and is precut for integrated finish and even easier installation of Thule VeloSwing
  • For vans with parking sensors : Designed for vans with parking sensors
  • Specifically developed for certain vehicles : Developed specifically for the Fiat Ducato, Peugeot Boxer, Citroën Jumper from 2006 onwards, the Opel Movano from 2022 onwards and the Toyota Proace Max from 2024 onwards

Associated Products
Quick View     Thule VeloSwing Precut Bumper (Without Parking Sensors)

Frequently Asked Questions


What is the difference between Thule VeloSwing Precut Bumper 302065 and 302066?
The only difference is parking sensor compatibility. Part 302065 is designed for vans without rear parking sensors. Part 302066 is the version for vans fitted with rear parking sensors, as it includes the correct apertures to allow the sensors to remain fully functional after fitting. Both bumpers are otherwise identical in design, finish and vehicle compatibility.
Which vehicles is the Thule VeloSwing Precut Bumper 302066 compatible with?
The 302066 is compatible with the Fiat Ducato, Peugeot Boxer and Citroën Jumper from 2006 onwards, the Opel Movano from 2022 onwards, and the Toyota Proace Max from 2024 onwards. It is designed exclusively for use with the Thule VeloSwing towbar system and must be used alongside that product.
Do I need to replace my van's bumper to install the Thule VeloSwing?
No, the precut bumper is an optional accessory rather than a required component for fitting the Thule VeloSwing. The VeloSwing can be installed without replacing the bumper. However, using the precut bumper gives a factory-finished appearance and simplifies the installation process because the bumper aperture is already cut to the exact dimensions required.
Will fitting the Thule VeloSwing Precut Bumper 302066 affect my parking sensors?
No. The 302066 is specifically designed to retain full parking sensor functionality. It includes pre-cut apertures sized and positioned for the sensors used on compatible van models. Choosing this version over the 302065 (non-sensor version) is the correct choice for any van that has factory-fitted or dealer-fitted rear parking sensors.
What tools are needed to install the Thule VeloSwing Precut Bumper?
Installation requires a TX30 Torx screwdriver. All necessary fixings are included in the box with the bumper. Thule provides a dedicated installation guide (document reference EBS901-00) covering both the sensor and non-sensor variants, with separate illustrated steps for each configuration.
Where is the Thule VeloSwing Precut Bumper manufactured?
The Thule VeloSwing Precut Bumper is manufactured in Belgium. Thule's Belgian facility address is Kortrijkstraat 343, 8930 Menen, Belgium. The product is part of Thule's RV rack accessory range and is designed and quality-checked to Thule's standard specifications.
Is the Thule VeloSwing Precut Bumper suitable for motorhome conversions based on the Fiat Ducato?
Yes. The Fiat Ducato is the base platform for a large proportion of motorhome conversions in the UK and Europe, and the VeloSwing system including the precut bumper is fully compatible with Ducato-based vehicles from 2006 onwards. It is equally suited to panel vans, campervans and motorhomes built on the Ducato, Boxer or Jumper platforms.
Does the Thule VeloSwing Precut Bumper come with a Thule guarantee?
Yes. As an official Thule accessory product, the VeloSwing Precut Bumper is covered by Thule's standard guarantee. Full terms and conditions of the Thule guarantee are available directly on the Thule website at thule.com. Registration details and guarantee scope vary by region.
  Loading...
If you’ve changed your mind about keeping your purchase, please return it in its original condition with proof of purchase and we’ll exchange or refund it. Unless faulty, this should be within 100 days of receiving your order. By original condition, we’d expect this to mean that you’ve kept packaging and labels, and that the item is undamaged and unused.

For further information of how to return your item, please visit the "Returning an Unwanted/Faulty/Damaged Item" section on our Help Page.
  Did you know we have been established and have been in the caravan and motorhome industry for over 50 years?
Deal of the Day

Fiamma Safe Door Frame Locks x 3 (White)

Product Ref: 241523

£136.12 RRP £227.99 SAVE £91.87

(inc VAT)

VIEW DEAL  
OFFER ENDS IN:
00:00:00

How It Works

  • 24 Hours Only: Price updates every day at midnight.
  • Limited Stock: When it's gone, it's gone!
  • New Deal Daily: Check back tomorrow for a new offer.

RELATED PRODUCTS

Trustpilot

SUPPORT

GET IN TOUCH

Please visit the help page or email us

orders@leisureshopdirect.com

HELP

HELP

INFORMATION

MY ACCOUNT