CBE PC150 Control Panel (same specs as PC100) image 1

CBE PC150 Control Panel (same specs as PC100)

£73.08(inc VAT) £94.99
View delivery optionsView product description
  Product Description
* CBE PC150 Microprocessor controlled digital system with LED control panel. This is has the same functionality and specifications as the standard PC100 control panel but has a different design. It also has PC100 printed on the front and not PC150.

The CBE PC150 LCD display module is the replacement screen component for CBE PC100 analogue control panels fitted in caravans and motorhomes. This display unit shows all your essential readings including battery voltages, water tank levels, and temperature data that the main control panel processes. The grey-framed LCD connects to your existing PC100 controller via the supplied ribbon cables and connectors. If your original display has developed faults like dim segments, flickering, or complete failure, this replacement gets your control panel functioning again without replacing the entire system.

Installing this display involves disconnecting the failed unit from your existing PC100 base controller and connecting the new screen using the provided cables. The microprocessor in your main control panel continues handling all the actual monitoring and switching functions, whilst this display simply presents that information visually. You'll see the same LED indicators for battery status, the same water level readings, and identical temperature displays as your original setup provided. The grey frame matches the standard CBE finish used across their analogue panel range from this period.

One thing to confirm before ordering is that you definitely have a PC100 system rather than other CBE models like the PC200 or PC180, as display modules aren't interchangeable between different panel types. The connectors and pin configurations vary between CBE's control panel generations. This display works exclusively with PC100 base units, so check your existing panel's model number printed on the unit itself. The replacement process requires basic DIY skills to access the back of your control panel and swap the connectors, though no electrical rewiring of the motorhome's systems is needed.

CBE PC 150 Analogue Control LCD Display Features


  • Monitors vehicle and leisure battery voltage levels
  • Controls water pump, lights, and fridge operation
  • Displays fresh and waste water tank levels on LCD
  • Shows internal and external temperature readings
  • Backlit buttons for easy night-time operation

Specifications
  • Voltage rating : 12V DC operation
  • Panel dimensions : 192mm width x 78mm height
  • Trim colour : Dark grey finish
  • Mounting type : Recessed panel installation
  • Compatibility : CBE PC100 systems only


Associated Products
Quick View     CBE PC 100 Complete System


Frequently Asked Questions

What is included with the CBE PC150 replacement LCD display?
The replacement display includes the LCD screen module with its grey frame surround, the ribbon cables that connect to your existing PC100 base controller, and all necessary connectors. This is just the display component, not the complete control panel system. Your existing PC100 controller continues handling all monitoring and switching functions whilst the new display shows the information.
Will this display work with other CBE control panel models?
This LCD display module works exclusively with CBE PC100 base controllers. It cannot be used with other CBE models like the PC200, PC180, or DS300 series because the connector types, pin configurations, and communication protocols differ between panel generations. Check the model number printed on your existing control panel to confirm you have a PC100 system before ordering this replacement display.
How do I replace the display on my CBE PC100 panel?
Disconnect the 12V power supply to your control panel before starting. Remove the screws holding the existing display frame to access the back of the unit. Carefully disconnect the ribbon cable connectors from the base controller by releasing the locking tabs. Connect the new display module using the supplied cables, ensuring connectors click fully into place. Secure the new grey frame with the mounting screws and restore power. No rewiring of your motorhome's electrical system is required as you are only replacing the display component.
What causes CBE PC100 displays to fail?
LCD displays fail through age-related degradation, where the liquid crystal compounds break down and cause dim or missing segments. Moisture ingress from leaks damages the electronic components behind the screen. Voltage spikes from poor electrical connections or faulty battery chargers can destroy the display driver circuits. Physical damage from impacts cracks the screen itself. Temperature extremes in stored motorhomes accelerate LCD deterioration, particularly in units over ten years old.
Can I upgrade my PC100 to a digital display with this replacement?
This replacement maintains the same analogue LED display technology as your original PC100 system. Upgrading to modern digital displays with percentage readouts requires replacing the entire control panel with newer models like the CBE PC200 or third-party systems, as the PC100 base controller uses different communication methods than digital panels. The analogue architecture cannot interface with digital display modules.
Will the replacement display show the same information as my original?
The replacement LCD displays identical information to your original screen including LED indicators for leisure and vehicle battery voltages, fresh water tank level segments, internal and external temperature readings, and status lights for connected systems like pumps and lighting circuits. The display format and layout match the original PC100 specification, so all readings appear in the same positions with the same LED patterns.
Does replacing just the display fix all PC100 problems?
Replacing the display only fixes issues with the screen itself like dim segments, flickering, or blank displays. If your control panel has problems with switches not working, relays not engaging, or incorrect sensor readings, the fault lies in the base controller unit rather than the display. Test whether the panel responds to button presses and controls equipment before assuming the display is the faulty component. A working base controller with a failed display still operates your motorhome systems but provides no visual feedback.

1 Customer Review on CBE PC150 Control Panel (same specs as PC100)

CBE Pc150 Control

by Greg stevens (26 Oct 2023)
5 star review(5/5)
Excellent product excellent company who delivered a well packed item BEFORE stated time. Highly recommend
  Loading...
If you’ve changed your mind about keeping your purchase, please return it in its original condition with proof of purchase and we’ll exchange or refund it. Unless faulty, this should be within 100 days of receiving your order. By original condition, we’d expect this to mean that you’ve kept packaging and labels, and that the item is undamaged and unused.

For further information of how to return your item, please visit the "Returning an Unwanted/Faulty/Damaged Item" section on our Help Page.
  Did you know we have been established and have been in the caravan and motorhome industry for over 50 years?

RELATED PRODUCTS

Trustpilot

SUPPORT

GET IN TOUCH

Please visit the help page or email us

orders@leisureshopdirect.com

HELP

HELP

INFORMATION

MY ACCOUNT