Truma / Carver Auto igniter box only - for Trumatic S3002/S3004 & S5002/S5004 image 1 Truma / Carver Auto igniter box only - for Trumatic S3002/S3004 & S5002/S5004 image 2

Truma / Carver Auto igniter box only - for Trumatic S3002/S3004 & S5002/S5004

£83.94 (inc VAT) £96.99NewCondition
Auto igniter for Trumatic S3002. Fitted after 07/99 but can be adapted for earlier fires. Does not include battery. Also for S2200, S3004 and S5002/S5004....

...read more

    Loading... Loading stock details...

Auto igniter for Trumatic S3002. Fitted after 07/99 but can be adapted for earlier fires. Does not include battery. Also for S2200, S3004 and S5002/S5004.

Compatible with the earlier SL3002

8 Technical Questions on the Truma / Carver Auto igniter box only - for Trumatic S3002/S3004 & S5002/S5004

Question

hi tom is it normal for the ignition to stay on on a truma s5002 heater after the main burners are lit mine stays on all the time
 on 

Answer

No, the igniter should cut our once the flame is lit. It is likely that you have a faulty igniter. Our ref. 228051

Question

I have replaced the battery for my caravan's Truma heater; it lights the fire but when turned off the igniter continually clicks; please can you advise?
 on 

Answer

This either a problem with the igniter box itself or a problem with the microswitch in the gas valve. There is a brown and black wire that connects the gas valve to the igniter and these wires can be unplugged from the igniter. If when unplugged you still have the problem then you will need to replace the igniter box, our ref. 128051. If however the sparking stops when you unplug the wires then you will need to replace the microswitch and this is a workshop job as gas connections need to be broken.

Question

I have a truma 3002 ultraheat fire ,after lighting the gas fire the ignition keeps on sparking but the fire can be adjusted and the controlled, can you please solve this for me. Barry
 on 

Answer

You have a problem with the igniter box which almost certainly needs replacing. Our ref. 128051.

Question

Good day. Having problems with non functioning automatic igniter in S3002/S heater, have read your replies to similar queries. Battery OK. Wise initially to perhaps change the igniter box if so do you stock them and ? price. Look forward to hearing from you, Alan Seaton.
 on 

Answer

If you are getting no 'clicking' from the igniter then it could be a faulty igniter or perhaps a faulty switch in the gas valve. To check if the switch is faulty disconnect the brown and black wires from the igniter and connect the two terminals together. If the igniter starts clicking then the switch is the problem. If not then replace the igniter.
The igniter is our part 128051 at £50.99.

Question

Truma ultra heat fire, works fine but the piezo ignition is constantly clicking once it has warmed up. The fire is used a lot. What do I need? Many thanks Kevin ex mechanic
 on 

Answer

I assume that you have the automatic igniter box fitted to your fire which can be the problem if the ignition is constantly clicking. Alternatively the ignition electrode could be at fault. Easiest to change the igniter box first as the fire has to be removed to change the electrode.

Question

My truma heater has auto ign and its not working can can you supply me with a new one it has a battery in it bottom left of heater. s3002- s5002 I believe. please email me back and i will buy it , I cant open your parts list.
 on 

Answer

The part that you require is our part 128051. please telephone to order.

Question

Hi, Truma S3002 piezo igniter is continually sparking even when not being used .Will only stop when battery is removed hope you can help
 on 

Answer

This problem can have two causes. Firstly the igniter itself could be faulty. Secondly the switch in the gas valve, that is 'made' when the knob is depressed, may have gone 'short circuit'. There is a thin brown and black wire that leads from the switch to the igniter. If you unplug this from the igniter and the clicking continues then it is a problem with the igniter. If the clicking stops then the switch is the problem. (not easy to replace).

Question

I have a Trumatic S3002 heater with auto igniter, on Saturday the igniter stopped (no clicking noise), replacing the battery did not make any difference. I tried it many times Saturday and Sunday but without success, this morning I tried again and it worked but with quite a limp sounding click. Which part usually fails ? Thanks
 on 

Answer

First try another battery, the one that you have fitted may be faulty - best to use a duracell or equivalent. If the problem persists then there is probably a fault with the igniter itself or these may be some debris or condensation on the gas burner preventing the igniter's path to earth which creates the spark.

7 Customer Reviews on Truma / Carver Auto igniter box only - for Trumatic S3002/S3004 & S5002/S5004

Truma S3002 Auto Igniter

by Mr Wright (12 Nov 2016)
5 star review(5/5)
I had a problem with my Truma heater, not igniting, sent an email to Leisuredirect and they suggested a solution, i.e. replacing the igniter. I live in Spain and I received the replacement igniter within 7 days. First class service
5 5

Good Service And It Works

by K Allan (06 Jul 2016)
3 star review(3/5)
It arrived within a week of order and it works ok.
3 5

Broken Fire

by Mr S (31 Mar 2016)
5 star review(5/5)
Fixed the fire
5 5

Good Service

by Andy Sweetman (09 Mar 2016)
4 star review(4/5)
A new part required due to failure of the original at 13 years old. A direct replacement, therefore easy fit and it works. All I could ask for
4 5

Auto Ignighter

by BobbyB (31 Oct 2013)
4 star review(4/5)
Good quick fix.
4 5

Wilkins Motorcaravans

by Mr Wilkins (24 Jul 2012)
4 star review(4/5)
Fast efficient service at the right price
4 5

Mr Williams

by Mr williams (05 Jan 2012)
5 star review(5/5)
this product has solved a big problem i was having with my caravan fire
5 5
  Did you know we have been established and have been in the caravan and motorhome industry for over 50 years?