Outwell Wakefield XL Tent Connector image 1 Outwell Wakefield XL Tent Connector image 2 Outwell Wakefield XL Tent Connector image 3 Outwell Wakefield XL Tent Connector image 4 Outwell Wakefield XL Tent Connector image 5 Outwell Wakefield XL Tent Connector image 6

Outwell Wakefield XL Tent Connector

£64.99(inc VAT) £75.00
View delivery optionsView product description
The Outwell Wakefield XL Tent Connector bridges the gap between your Outwell tent and either the Event or Summer Lounge XL shelter, creating a covered walkway that keeps you dry when moving between spaces. Made from Outtex 1500 Select Silver polyester with a 1500mm hydrostatic head, it stands up to typical British weather while the UPF 50+ protection blocks harmful UV rays during summer camping trips. The fabric uses PFAS-free water repellency treatment, addressing environmental concerns without compromising performance. Two tent connection straps pull everything together for a tight, draught-free seal that stops wind whipping through the gap. At 1.5kg and packing down to 30 x 30 x 9cm, it slots into most car boots without taking up valuable space.

Pitching takes minutes because the connector goes up in one piece rather than requiring separate flysheet and inner assembly. You fix it to your tent's connection points using the included straps, then peg out the opposite end to your shelter. This matters during changeable weather when you want protection sorted quickly. The silver coating on the flysheet reflects heat, keeping the connector noticeably cooler than darker alternatives when the sun's out. One consideration: you'll need to check your tent model has the compatible connection points before buying, as not all Outwell tents work with this system. The connector specifically fits tents designed with the Wakefield connection system, typically found on larger family models from recent years.

The Wakefield XL suits families who've invested in both an Outwell tent and one of their shelter systems, particularly those camping for extended periods where having that covered connection genuinely improves daily life. It stops the dash through rain to reach your cooking area or sitting space, and creates a proper entrance vestibule that keeps mud and wet gear contained. The 100% polyester construction throughout means everything dries quickly after wet weather, ready for the next trip. Outwell includes pegs in the pack, though experienced campers often swap these for heavier-duty alternatives on exposed sites. The connector works year-round but proves most valuable during spring and autumn when weather turns unpredictable.

Outwell Wakefield XL Tent Connector Features


  • Connects Event- or Summer Lounge XL to an Outwell tent for additional space protected from rain and sun
  • Fast and easy to pitch and pack away as required
  • Attaches tightly to the main tent for a draught-free fit

Specifications
  • Art. No. : 111588
  • Barcode - Product : 5709388159441
  • Flysheet : Outtex® 1500 Select Silver polyester
  • Caring Choice : PFAS Free water repellency
  • UV protection : UPF 50+
  • Hydrostatic Head : 1500 mm
  • Pitching method : In one
  • Weight : 1.5 kg
  • Textile fiber composition : Flysheet: 100% Polyester
    Carrybag: 100% Polyester
  • Content : Pegs, 2 pcs tent connection straps
  • Pack size : 30 x 30 x 9 cm

Frequently Asked Questions

Which Outwell tents work with the Wakefield XL Connector?
The Wakefield XL Connector works with Outwell tents featuring the Wakefield connection system, typically larger family models from 2020 onwards. This includes tents like the Oakwood series, Willwood series, and select models from the Whitecove and Bayfield ranges. Check your tent's specification sheet for Wakefield compatibility or look for the connection point loops on your tent's exterior wall. Not all Outwell tents have this system, so verification before purchase prevents compatibility issues.
Can I use the Wakefield XL Connector with other brand shelters?
No, this connector is designed specifically for Outwell Event Lounge XL and Summer Lounge XL shelters. The connection straps and attachment points match Outwell's proprietary system dimensions and mounting locations. Using it with other brands creates gaps, poor weather sealing, and structural instability. Outwell engineered the connector to work as part of their integrated camping system where components are designed to fit together precisely.
How waterproof is the Wakefield XL Connector in heavy rain?
The connector has a 1500mm hydrostatic head rating, which handles typical British rainfall including sustained moderate rain and brief heavy downpours. This rating matches standard tent flysheet specifications and performs well for weekend camping and week-long holidays. The PFAS-free water repellent treatment on the Outtex 1500 Select Silver polyester fabric causes water to bead and run off rather than soaking through. The two tent connection straps create a tight seal at the tent junction, preventing water ingress at this critical point where many cheaper connectors leak.
How long does the Wakefield XL Connector take to pitch?
Pitching takes approximately 5 to 10 minutes for one person, less with two people helping. The connector pitches in one piece, eliminating the separate flysheet and inner assembly steps found on traditional tent extensions. You attach the connector to your tent's connection points using the included straps, then peg out the opposite end to your shelter. The single-piece construction makes setup faster during changeable weather when you want protection established quickly. First-time setup takes slightly longer while you familiarize yourself with the attachment points.
What's included with the Outwell Wakefield XL Connector?
The package includes the connector tunnel itself, 2 tent connection straps for attaching to your tent, pegs for securing to the ground, and a carry bag. The connector weighs 1.5kg total and packs down to 30 x 30 x 9cm. Many experienced campers replace the included pegs with heavier-duty alternatives on exposed or soft ground sites. The 100% polyester carry bag protects the connector during storage and transport.
Will the connector stay secure in strong winds?
The connector performs well in moderate winds typical of most UK camping conditions when properly pegged. The two tent connection straps create a draught-free seal that stops wind whipping through the junction between tent and connector. Strong gusts above force 6 on exposed sites can stress the fabric and connection points. Additional guy lines and heavier pegs improve stability during windy conditions. The lightweight 1.5kg construction makes it more susceptible to wind lift compared to heavier tunnel designs, so proper ground anchoring is important.
Does the silver coating on the connector reduce internal temperature?
Yes, the Select Silver coating on the flysheet reflects solar radiation, keeping the connector noticeably cooler than darker fabrics during sunny conditions. This makes walking through the connector more comfortable during summer camping when temperatures rise. The UPF 50+ protection blocks 98% of harmful UV rays, protecting both occupants and the fabric itself from sun damage. The silver coating also helps prevent condensation buildup inside the connector during temperature fluctuations between day and night.
Can I leave the connector attached when packing away my tent?
No, you need to detach and pack the connector separately from your tent and shelter. The connection straps easily unfasten for quick disconnection. Packing everything together creates an unwieldy bundle that won't fit properly in individual carry bags and makes future setup more complicated. The connector's compact 30 x 30 x 9cm pack size means it stores separately without taking up significant vehicle space. Always dry the connector completely before packing to prevent mildew growth during storage.

EAN-13 : 5709388159441
  Loading...
If you’ve changed your mind about keeping your purchase, please return it in its original condition with proof of purchase and we’ll exchange or refund it. Unless faulty, this should be within 100 days of receiving your order. By original condition, we’d expect this to mean that you’ve kept packaging and labels, and that the item is undamaged and unused.

For further information of how to return your item, please visit the "Returning an Unwanted/Faulty/Damaged Item" section on our Help Page.
  Did you know we have been established and have been in the caravan and motorhome industry for over 50 years?

RELATED PRODUCTS