Hot water outlet fitting Truma Carver Water Heaters image 1 Hot water outlet fitting Truma Carver Water Heaters image 2

Hot water outlet fitting Truma Carver Water Heaters

£5.39 (inc VAT) £5.99NewCondition
View delivery optionsView product description
Hot water outlet fitting Carver Water Heaters. Fitted at top right hand corner when looking at the rear of the heater. Includes rubber grommet.

Part Number: 101026PK

This was used on the carver cascade mk2 water heater. These used to be white in colour. Also this can also be used on the copy water heater called the Henry water heater.

22 Customer Reviews on Hot water outlet fitting Truma Carver Water Heaters

Easy Purchase


5 star review(5/5)
Arrived quickly, good as the original and it fits. Proper job!

Perfect Part But Prepare For Fitting


5 star review(5/5)
Totally correct replacement. Please ensure you prepare the threads of the cast aluminium heater section prior to any attempt to fit. Should you fail to clean the threads there is a chance you could break the replacement part as you tighten it against the shoulders of the nut section. I used a liquid gasket product used by plumbers which acted as a lubricant and also ensured a seal where the aluminium threads had corroded.

Hot Water Outlet


5 star review(5/5)
Good price, just as ordered, super deliver

Mr


5 star review(5/5)
This was perfect for the job. These plastic bits in my 20+ year old carver have all started to disintegrate and I was pleased to get bits that fitted. Delivery was prompt so I could get on with the job. The only down side was removing the old fittings.

Service


5 star review(5/5)
First class service, thankyou!

Carver Heater


3 star review(3/5)
Arrived quickly and a good price not fitted yet so cannot comment about fitting

Plastic Is Not The Right Material


3 star review(3/5)
This item conveys hot water from the gas boiler and distributes to the hot water taps. After 6 - 12 months this item is prone to snap off when pressure is applied with a spanner to service the boiler . So always order a pair of these. I managed to get the fitting made in brass and they last much longer !!

Hot Water Valve


5 star review(5/5)
brill very happy and fast delivery

Hot Water Outlet Fitting For Carver Heater


5 star review(5/5)
Purchased this along with cold water inlet. Removed Carver heater from motorhome to readily access remnants of old fittings that left threaded segment in hole. Threads are M16 x 2mm. Used Sikaflex 512 product to re-seal unit heater in place.

Carver Hot Water Outlet


5 star review(5/5)
good quality product does exactly what it says on the tin, fast delivery great shop

Carver Hot Water Outlet


5 star review(5/5)
Looks stronger and better than the original part.

Carver Hot Water Outlet


3 star review(3/5)
Thii water outlet connector does just what it said, fitted fine, slightly longer than the original, which is no issue, turned up very promptly helpful to fit it with a bit of vaseline

Hot Water Outlet Fitting Carver Water Heater


5 star review(5/5)
Just what I needed. Fitting no problem and good quality. Exactly the same problem as other reviewers in that the old fitting sheared but was not too difficult to remove by careful use of junior hacksaw blade, patience and WD40!!

Kevin


5 star review(5/5)
After replacing the Shurflo pump I found a leak on the hot water outlet from water heater. I ordered this part with new 12mm hose and various 12mm JG connectors. The delivery arrived within 2 days and my van was ready to use after about 2 hours, most of the time was taken removing the old water outlet which sheared when I was unscrewing it. Thanks again Leisureshop.

Highly Recommended


5 star review(5/5)
Excellent item and very fast delivery

Exactly What I Needed


5 star review(5/5)
Exactly what I needed to get my water heater working

Perfect


5 star review(5/5)
part was exactly right, heater working good as new in no time

Hot Water Outlet Fitting Carver Water Heater


5 star review(5/5)
The item was dispatched very quickly. It was received in good condition. Very satisfied.

Paul Yarwell


5 star review(5/5)
Outlet connector was wanted.
Easy to find on site.
Easy to order on site
Fast delivery.
WELL DONE !!!

Wendy


5 star review(5/5)
We had a leak - googled the water heater and found this site. The replacement Carver Water Connector was easy to find, was offered at a good price with reasonable P&P, and once ordered arrived promptly. What more can I say - excellent!

Replacement Carver 2 Water Connector


5 star review(5/5)
Discovered broken hot water outlet connector on my Carver 2 heater on Sunday afternoon - found replacement on Leisureshopdirect.com straight away and ordered it - part arrived Tuesday morning and I had it fitted by lunchtime! Fanatstic delivery service!

Mr.Howrad Fone


5 star review(5/5)
Very good service throughout,and at a GOOD price. Save a lot of worry and money
  Loading...
If you’ve changed your mind about keeping your purchase, please return it in its original condition with proof of purchase and we’ll exchange or refund it. Unless faulty, this should be within 30 days of receiving your order. By original condition, we’d expect this to mean that you’ve kept packaging and labels, and that the item is undamaged and unused.

For further information of how to return your item, please visit the "Returning an Unwanted/Faulty/Damaged Item" section on our Help Page.
Collecting your items from our warehouse
In order to protect our staff under current circumstances, please do not visit our warehouse to make a collection. We currently don't have a shop front and you are not able to view products at our property. We apologise for any inconvenience caused.
  Did you know we have been established and have been in the caravan and motorhome industry for over 50 years?

RELATED PRODUCTS