Breathable mesh shade for caravan wind out awnings. Fits Thule/Dometic.
The Isabella Shade Screen attaches directly to wind out canopies on caravans and motorhomes, extending sun protection beyond what the standard awning provides. Made from 550g per square metre polyester mesh fabric, this screen blocks harmful UV rays whilst maintaining excellent airflow underneath, preventing the stuffy conditions that solid panels create. Installation takes seconds by sliding the beaded edge into the front rail of Thule, Dometic, or Fiamma wind out canopies, with no tools or complicated fixings required. Available in multiple widths from 200cm to 400cm and two height options at 75cm or 145cm, there's a size to match most vehicle setups.
Caravanners and motorhome owners who spend extended periods pitched up during warmer months get the most use from these screens, particularly when the sun sits low in the morning or evening and standard canopies don't offer adequate coverage. The breathable mesh construction makes a noticeable difference to temperatures underneath, with the fabric allowing breezes through whilst cutting solar heat gain. The 200cm x 145cm version includes beading on both short edges, earning it the nickname "Turntable" because it can be fitted horizontally or vertically depending on where shade is needed most.
One consideration is that the screen won't fit canopy rails measuring outside the standard 5mm or 6mm dimensions, so checking rail size before ordering prevents returns. The mesh fabric requires occasional cleaning to maintain its appearance, especially after exposure to tree sap or bird droppings, though a gentle wash with mild detergent restores it easily. Isabella backs the Shade Screen with a two-year warranty, extendable to three years through their club registration scheme, and the robust polyester construction typically outlasts cheaper alternatives that use lighter weight materials.
Isabella Shade Screen 75 Features
- Creates additional shade beyond the wind out canopy
- Quick and easy installation by sliding the bead into the wind out canopy rail
- Fits Thule, Dometic and Fiamma wind out canopies
Frequently Asked Questions
The Isabella Shade Screen has been tested to fit Thule, Dometic, and Fiamma wind out canopies, which represent the majority of caravan and motorhome installations in the UK. The screen uses a standard beading size that slides into the front rail of these awnings. Most wind out canopies manufactured after 2010 use either 5mm or 6mm rail channels, and the Isabella screen accommodates both dimensions. The 200cm x 75cm version features beading on both edges specifically to fit both rail sizes. If your wind out canopy is from a different manufacturer or is an older model, measure the front rail channel width before purchasing to confirm compatibility.
Measure the width of your wind out canopy's roller bar or the vinyl fabric length to determine the correct shade screen width. Isabella manufactures screens in 200cm, 300cm, and 400cm widths. Choose a width that matches or slightly exceeds your canopy length for complete coverage. Height options are 75cm or 145cm, with the taller version providing more extensive shade when the sun is at a lower angle. The 200cm x 145cm model can be installed horizontally or vertically, offering flexibility for different sun positions throughout the day. For caravans with pop-top roofs, verify that the screen height allows proper clearance when the roof is raised.
Installation requires no tools and takes less than five minutes. Extend your wind out canopy to its full length first, then locate the front rail channel that runs along the leading edge. Starting at one end, align the Isabella Shade Screen's beading with the rail opening and slide it along the entire length until fully inserted. The beading should glide smoothly into the channel without forcing. Once inserted, the screen hangs naturally from the front of the canopy. The mesh fabric's weight keeps it positioned correctly, though optional guy ropes and pegs can be attached in windy conditions for additional stability. To remove, simply slide the beading back out of the rail channel before retracting the canopy.
The Isabella Shade Screen uses 550 grams per square metre 100 per cent polyester mesh fabric, which provides a balance between durability and breathability. This mesh construction blocks approximately 80 to 85 per cent of sunlight and UV radiation whilst allowing air to circulate freely underneath the canopy. The polyester material resists fading from sun exposure and withstands typical outdoor conditions including light rain and wind. The fabric is UV-stabilised to prevent degradation over multiple seasons of use. Unlike solid panel alternatives, the mesh weave maintains visibility through the screen whilst creating a noticeably cooler environment beneath the canopy by reducing direct solar heat without trapping hot air.
The shade screen must be removed before retracting the wind out canopy. Leaving it attached will prevent the canopy from rolling up properly and can damage both the screen and the canopy mechanism. Removal takes only seconds by sliding the beading out of the front rail channel. Isabella designed the screen for frequent attachment and removal, so the beading system tolerates repeated use without deterioration. Store the screen in its carry bag when not in use to protect it from dirt and potential damage. Some caravanners leave the screen attached throughout a multi-day pitch if weather conditions remain stable, but it should always be removed before travel or when strong winds are forecast.
The 550g per square metre polyester mesh blocks approximately 80 to 85 per cent of direct sunlight whilst maintaining visibility and airflow. This level of shade protection significantly reduces temperatures underneath the wind out canopy compared to using the canopy alone, particularly during morning and evening when the sun angle is low and standard canopies offer limited protection. Users typically experience a noticeable reduction in glare and heat whilst still enjoying natural light and the ability to see outward through the mesh. The breathable construction prevents the greenhouse effect that solid panels can create, allowing hot air to escape whilst blocking harmful UV rays. The actual shade coverage area depends on which size screen is installed, with the 145cm height options providing more extensive protection than the 75cm versions.
Clean the Isabella Shade Screen using lukewarm water and a soft brush or sponge with mild detergent specifically designed for awning fabrics. Lay the screen flat on a clean surface or hang it whilst cleaning, working from top to bottom to prevent dirty water from running onto cleaned areas. Remove loose debris like leaves, dust, or cobwebs before washing. Apply the cleaning solution gently using circular motions, avoiding harsh scrubbing that might damage the mesh structure. Rinse thoroughly with clean water until all soap residue is removed, as leftover detergent attracts dirt. Allow the screen to dry completely before storing, as packing it away damp encourages mildew growth. Never use bleach, strong chemicals, or pressure washers, which can degrade the polyester fibres and UV-resistant coating. Regular cleaning every few months maintains appearance and extends the screen's functional lifespan.
The Isabella Shade Screen's mesh construction allows wind to pass through the fabric, making it more stable than solid panels in breezy conditions. The breathable design reduces wind resistance that would otherwise put stress on the wind out canopy mechanism. For moderate winds, the screen's beading attachment and the fabric's weight provide sufficient stability without additional securing. In stronger wind conditions, attach guy ropes to the bottom corners of the screen and peg them to the ground for extra security. The screen should be removed when wind speeds approach levels that would require retracting the wind out canopy itself, typically around 20 to 25 miles per hour depending on canopy manufacturer recommendations. The mesh fabric tolerates typical campsite breezes that might cause solid panels to flap or strain mounting points.
(11 reviews)
(14 reviews)
Loading shipping details...
-42857_xlge.jpg)
