Isabella Wind Side 250 - Left or Right wind-out canopy side panel creates sheltered outdoor space for caravans and motorhomes. 240cm deep, 4-minute setup, CarbonX pole and clear PVC window. UV resistant IsaLight fabric with suction cup attachment system.
The Isabella Wind Side 250 transforms your caravan or motorhome's wind-out canopy into a sheltered outdoor room with professional ease. Measuring 240cm deep and compatible with mounting heights between 245-270cm, this left or right configurable side panel attaches directly to your existing wind-out canopy rail to create additional protected living space. The side panel features a large crystal clear PVC window that maintains visibility whilst letting natural light flood your outdoor area, making it perfect for dining, relaxing or storing equipment out of the weather.
Constructed from Isabella's renowned IsaLight 195g/m² polyester fabric, the Wind Side 250 delivers exceptional durability and weather resistance without adding unnecessary weight to your setup. The CarbonX carbon fibre roof pole provides superior strength and rigidity compared to traditional materials, whilst the telescopic design and IsaFix locking bracket system allows for quick tensioning and secure positioning. Three high-performance suction cups create a draft-proof seal against your vehicle, preventing wind and rain ingress that can compromise comfort during unpredictable British weather.
Installation takes just four minutes according to manufacturer specifications, making the Wind Side 250 an accessible upgrade for caravanners who want extra shelter without complex setup procedures. The system includes tent pegs for additional ground anchoring, and the telescopic pole can be repositioned centrally on your wind-out canopy to create two separate outdoor rooms when required. However, the 245-270cm height requirement means compatibility should be verified before purchase, as some older caravans or motorhomes with non-standard rail heights may require alternative solutions.
Isabella Wind Side 250 Features
- Quick 4-Minute Setup System
- Crystal Clear PVC Window Panel
- High-Performance Suction Cup Attachment
- Lightweight CarbonX Carbon Fibre Pole
- Dual Room Configuration Capability
- Weather-Resistant IsaLight Fabric
Specifications
- Depth: 240 cm
- Mounting height: 245-270 cm
- Water-resistant & UV resistant
- Available in 2 versions for mounting on the right or left side of your wind out canopy
- Frame options: CarbonX fibreglass frame with IsaFix locking clamp
- Base Material: PVC 380 g/m2
- Side/Tent Material: IsaLite 195 g/m2 - remarkably light and easy-to-maintain material
- Colours: Grey
- Width (cm): 240
- Fits caravan heights between (cm): 245-270
- NetWeight: 4.11kg
Maintenance
- Vacuum or brush awning off when it is dry. Subsequently, wipe with a damp cloth.
- Windows can occasionally be sprayed with Aquatex reproofer, and then immediately wiped with a dry cloth (max. twice a year).
- For larger cleaning, IsaClean can be used. Aquatex should be used afterwards for reproofing.
Frequently Asked Questions
The Wind Side 250 fits vehicles with rail mounting heights between 245-270cm and works with wind-out canopies that have a 250cm projection depth. Most modern caravans and motorhomes fall within this range, but you should measure your vehicle's awning rail height from ground level and check your wind-out canopy depth before ordering. The system attaches directly to standard wind-out canopy rails.
The left and right versions determine which side of your wind-out canopy the panel attaches to when viewed from inside your caravan looking outwards. The left version mounts on the nearside (door side) of most UK caravans, whilst the right version mounts on the offside. Both versions are identical in construction and features, with the same 240cm depth, CarbonX pole system and clear PVC window.
The Wind Side 250 can be pitched in approximately 4 minutes according to Isabella's specifications. The system uses a telescopic CarbonX pole with IsaFix locking bracket for quick tensioning, and three suction cups that attach directly to your vehicle for secure positioning. The setup process involves sliding the panel into your wind-out canopy rail, positioning the pole, and securing the suction cups against your caravan or motorhome.
The Wind Side 250 is designed for normal camping conditions but should be taken down or monitored during strong winds, like any wind-out canopy accessory. The CarbonX pole includes rubber brackets at both ends to resist wind movement, and the three suction cups create a secure connection to your vehicle. However, excessive wind can damage any awning fabric, so the manufacturer recommends retracting wind-out accessories during severe weather conditions.
The Wind Side 250 is made from IsaLight 195g/m² coated polyester fabric that is water-resistant and UV resistant, designed for outdoor camping use. The fabric provides protection from light rain and sun, but like most caravan awning materials, it's water-resistant rather than fully waterproof. The clear PVC window panel allows natural light whilst maintaining weather protection, and the overall construction is designed for longevity in typical British camping conditions.
Yes, the telescopic roof pole can be repositioned and placed centrally on your wind-out canopy to divide the space into two separate outdoor rooms. This flexibility allows you to create distinct areas for different activities, such as dining and storage, or to provide separate spaces for different family members. The pole's telescopic design and IsaFix locking system makes repositioning straightforward without requiring additional tools.
The Wind Side 250 comes complete with the side panel fabric, one telescopic CarbonX roof pole with IsaFix locking bracket, three high-performance suction cups for vehicle attachment, and tent pegs for additional ground securing. All components needed for installation and setup are included in the package, so no additional parts need to be purchased separately to use the system with your existing wind-out canopy.
The complete Wind Side 250 system weighs 4.11kg according to manufacturer specifications. This relatively light weight is achieved through the use of CarbonX carbon fibre for the roof pole and lightweight IsaLight polyester fabric, making it easy to transport, handle during setup, and store when not in use. The compact design means it doesn't add significant weight to your caravan or motorhome's payload.
(11 reviews)
(14 reviews)
Loading shipping details...
-42857_xlge.jpg)
