Fiamma Awning Bracket Kit for Ford Custom Lift Roof - Deep Black

£114.99(inc VAT) £149.99
View delivery optionsView product description
This Fiamma bracket kit provides the specific mounting hardware needed to fit F45 or F35 awnings onto Ford Custom vans with lift roofs. You get two 12cm brackets finished in deep black that attach directly to the van's wall, creating a secure fixing point for your awning. They're designed specifically for right-hand drive UK vans in both L1 and L2 wheelbase configurations, which matters because the mounting points differ from left-hand drive European models.

The brackets work with both the F45 and F35 Fiamma awning ranges, giving you flexibility if you're upgrading or replacing an existing setup. The deep black powder-coated finish matches most modern van exteriors without standing out awkwardly. One operational point to remember is that you'll need to close your sliding door before opening or closing the awning, as the bracket positioning means the awning mechanism can clash with an open door. The kit comes with all necessary fixings for wall mounting, though you'll want to ensure you're drilling into suitable load-bearing points on your van's bodywork.

Installation follows Fiamma's standard wall-mounting procedure, with the brackets spacing determined by your specific awning model's rail length. The 12cm depth provides adequate clearance for lift roof operation without the awning interfering with the roof when raised. These brackets are manufactured in Italy to Fiamma's specifications and are designed to handle the weight and wind loading of their awning systems when properly installed. If you're fitting an F45, you'll typically use these in conjunction with Fiamma's standard awning rail, while F35 installations mount slightly differently as shown in Fiamma's fitting guides.

Fiamma Awning Bracket Kit for Ford Custom Lift Roof - Deep Black Features


  • Two 12cm brackets designed for wall installation
  • Deep black finish, providing a stylish and sleek appearance
  • Designed for wall installation of Fiamma F45 and F35 awnings
  • Specifically designed for L1 and L2 vans (right-hand drive UK vans)

Specifications
  • Application : Ford
  • Country of Origin : Italy

Frequently Asked Questions


Will these brackets fit both F45 and F35 Fiamma awnings?
Yes, this bracket kit works with both Fiamma F45 and F35 awning models. The 12cm wall-mounting brackets provide the correct standoff distance for either awning type when fitted to Ford Custom vans with lift roofs. The mounting hole pattern is compatible with both awning ranges.
Why must the sliding door be closed when operating the awning?
The bracket positioning on Ford Custom vans places the awning mechanism close enough to the sliding door track that an open door can interfere with the awning's operation. Opening or closing the awning with the door open risks damage to both the door and the awning mechanism. This is a design consideration specific to the Ford Custom's body shape and door configuration.
Are these brackets specific to right-hand drive UK Ford Custom vans?
Yes, this kit is designed for right-hand drive UK specification Ford Custom vans. The bracket positioning accounts for the sliding door being on the offside of right-hand drive vehicles. Left-hand drive European Ford Customs have different body pressings and door configurations that require alternative bracket kits.
Do these brackets work with both L1 and L2 wheelbase Ford Customs?
Yes, the bracket kit fits both L1 and L2 wheelbase Ford Custom vans. The wall-mounting position remains consistent across both lengths because the cab and sliding door area where the brackets mount is identical. The longer L2 wheelbase only extends the rear load area behind the mounting zone.
Will the 12cm bracket depth clear a lift roof when raised?
Yes, the 12cm depth is specifically calculated to provide clearance for lift roof operation. When your roof is raised, the awning cassette sits far enough from the van body that it won't clash with the roof mechanism or canvas. This depth also ensures the awning roller has adequate clearance from the van wall during operation.
What fixings are included with the bracket kit?
The kit includes the two deep black brackets and all necessary fixings for wall mounting to your Ford Custom. You'll receive the appropriate bolts, washers and fittings to secure the brackets to the van body. Installation requires drilling into the van wall at suitable load-bearing points, so proper preparation and sealant application around fixings is recommended.
Can these brackets be used on Ford Custom vans without lift roofs?
While physically possible, these brackets are optimized for lift roof installations where the 12cm depth provides necessary clearance. Standard roof Ford Customs typically use different bracket configurations that position the awning closer to the body. Using lift roof brackets on a standard roof van would work but may position your awning unnecessarily far from the van wall.

  Loading...
If you’ve changed your mind about keeping your purchase, please return it in its original condition with proof of purchase and we’ll exchange or refund it. Unless faulty, this should be within 100 days of receiving your order. By original condition, we’d expect this to mean that you’ve kept packaging and labels, and that the item is undamaged and unused.

For further information of how to return your item, please visit the "Returning an Unwanted/Faulty/Damaged Item" section on our Help Page.
  Did you know we have been established and have been in the caravan and motorhome industry for over 50 years?
Deal of the Day

Outwell Dreamhaven Single Self Inflating mat (15cm)

Product Ref: 278977

£103.29 RRP £164.99 SAVE £61.70

(inc VAT)

VIEW DEAL  
OFFER ENDS IN:
00:00:00

How It Works

  • 24 Hours Only: Price updates every day at midnight.
  • Limited Stock: When it's gone, it's gone!
  • New Deal Daily: Check back tomorrow for a new offer.
-