Fiamma F43 Bracket for VW T5/T6 Transporter Lift Roof RHD - Deep Black

£78.99(inc VAT) £102.99
View delivery optionsView product description
This Fiamma bracket kit solves the specific challenge of fitting an F43 awning to right-hand drive VW T5 and T6 Transporter models with elevating roofs. The brackets position the awning correctly on these vehicles where standard mounting solutions don't work due to the pop-top mechanism. Made in Italy by Fiamma, these components come with a deep black powder-coated finish that matches most vehicle roof colours and resists corrosion from road salt and coastal air. The kit includes all necessary brackets and fixings designed specifically for the roof profile of lift-roof Transporters, accounting for the raised sections and movement points that standard van roofs don't have.

Compatibility matters here because T5 models (2003-2015) and T6 models (2015-2019) share the same roof profile, but T6.1 versions from 2019 onwards have different dimensions. This bracket set works exclusively with RHD vehicles where the steering wheel sits on the right side, as the awning mounts on the passenger side of the van. The deep black finish provides better UV stability than standard black coatings and won't fade to grey after a few seasons of use. You'll need an F43 awning to go with these brackets - they're not compatible with F45 or F80 models which have different rail systems.

Installation requires drilling into the roof rail channels, so most owners either use a professional fitter or have solid DIY experience with vehicle modifications. The brackets accommodate the roof movement when you raise or lower the pop-top, with enough clearance to prevent the awning from catching or binding. Fiamma designed these after the standard T-track adapters proved unreliable on lift-roof models, where flex and movement caused mounting failures. The kit works with all F43 awning lengths from 2 metres up to 4 metres, with the brackets supporting the weight evenly across the roof structure rather than concentrating stress at single points.

Specifications
  • Suitable For : Volkswagen T5|Volkswagen T6
  • Application : Volkswagen
  • Country of Origin : Italy

Frequently Asked Questions


Will these brackets fit my VW T6.1 Transporter with a lift roof?
These brackets are designed for T5 and T6 models only. The T6.1 introduced in 2019 has different roof rail dimensions and pop-top mechanisms that require specific T6.1 bracket kits. Check your vehicle registration date to confirm which generation you have.
What's the difference between these and standard Transporter awning brackets?
Standard brackets mount to fixed panel van roofs. These lift roof brackets account for the movement and flex when you raise or lower the pop-top, with additional clearance and reinforced mounting points that prevent stress fractures. They also position the awning higher to clear the elevated roof section when deployed.
Do I need to drill holes in my Transporter roof to fit these brackets?
Yes, installation requires drilling into the roof rail channels. The brackets use self-tapping screws that go through the mounting plates into the reinforced sections of the roof structure. Many owners use professional fitters to ensure correct positioning and waterproof sealing around the fixings.
Will these brackets work with F45 or F80 Fiamma awnings?
No, these are specifically engineered for F43 awnings only. The F45 and F80 models have different rail profiles and mounting systems that won't align with these brackets. Each Fiamma awning series requires its own dedicated bracket kit.
Why are these brackets more expensive than generic awning brackets?
These are vehicle-specific components engineered for lift roof Transporters, with measurements and mounting points designed around the pop-top mechanism. Generic brackets don't account for roof movement and often fail on elevating roof models. The deep black powder coating and Italian manufacturing also contribute to the cost compared to basic bracket sets.
Can I still operate my lift roof with the awning mounted?
Yes, these brackets position the awning with sufficient clearance for the pop-top to raise and lower without interference. You should retract the awning before driving, but the permanent bracket installation doesn't restrict normal roof operation when the awning is wound in.
What length F43 awning will these brackets support?
The brackets work with all F43 awning lengths from 2 metres to 4 metres. The mounting points distribute weight evenly across the roof structure regardless of awning length. Most Transporter owners choose 2.6 metre or 3 metre awnings to match the vehicle length without excessive overhang.
Will the deep black finish match my Transporter's roof colour?
The deep black powder coat matches most dark roof colours and blends well with standard black or grey Transporter roofs. It's darker and more UV-stable than standard black finishes, maintaining its colour rather than fading to grey. On white or silver vans the brackets will be visible but many owners prefer this to colour mismatches from attempting to match lighter shades.

  Loading...
If you’ve changed your mind about keeping your purchase, please return it in its original condition with proof of purchase and we’ll exchange or refund it. Unless faulty, this should be within 100 days of receiving your order. By original condition, we’d expect this to mean that you’ve kept packaging and labels, and that the item is undamaged and unused.

For further information of how to return your item, please visit the "Returning an Unwanted/Faulty/Damaged Item" section on our Help Page.
  Did you know we have been established and have been in the caravan and motorhome industry for over 50 years?
Deal of the Day

Outwell Dreamhaven Single Self Inflating mat (15cm)

Product Ref: 278977

£103.29 RRP £164.99 SAVE £61.70

(inc VAT)

VIEW DEAL  
OFFER ENDS IN:
00:00:00

How It Works

  • 24 Hours Only: Price updates every day at midnight.
  • Limited Stock: When it's gone, it's gone!
  • New Deal Daily: Check back tomorrow for a new offer.
-