The Fiamma Turbo-Vent Premium is a 40 x 40cm motorised rooflight designed for motorhomes, caravans and van conversions. It operates through a touch control panel with LED status indicators, featuring a 10-blade fan powered by a 12V DC variable speed motor that refreshes the air inside your vehicle within seconds. The unit includes an aluminium mosquito net, permanent ventilation channels providing 80cm² of airflow, and fits roof thicknesses from 30mm to 85mm using the included extension capabilities. Available in both white and crystal finishes, this rooflight measures 455 x 455mm externally with a cutout requirement of 390 x 390mm.
How does the Polar Control function work on the Turbo-Vent Premium?
The Polar Control thermostat automatically activates ventilation based on the temperature differential you set and the outdoor temperature. When switched on, it detects the room temperature, and the fan runs until reaching your desired temperature. Fiamma recommends setting it to the minimum differential (?T-1°C) once comfortable temperature is achieved to reduce power consumption by up to 50% compared to continuous manual operation.
This rooflight features Fiamma's patented rubber seal and aerodynamic profile design, which eliminates the need for an external spoiler whilst reducing wind noise and vibrations during travel at motorway speeds. The touch control system includes acceleration ramps that protect the motor and your vehicle's control unit by gradually increasing and decreasing fan speeds. The Premium version's electronic interface provides rapid, problem-free changes in rotation direction, allowing the fan to function as both an extractor and ventilator. The reversible 300mm diameter fan delivers a maximum airflow of 35m³/min with power consumption ranging from 0.3A minimum to 3A maximum at 36W. Its reinforced frame makes it interchangeable with older 40 x 40cm Fiamma rooflights and compatible with apertures from 36 x 36cm to 42 x 42cm.
What makes this Premium?
This rooflight can have all functions set in motion by a simple finger-touch. Renewed electronic interface with signal LEDs. The Premium version of Fiamma Turbo-Vent has been given a modern design with advanced finger-touch controls; the state of the art interface is completed by brand new multicolor LED lights. Speed setting and switching now have acceleration ease which helps saving the Turbo-Vent motor and the vehicle control unit.
Fiamma Turbo Vent Premium Features
- Modern design with “Touch” electronic control unit
- Aerodynamic : Cover design to optimise air resistance and acoustic comfort
- Installation : With through screws, wide and reinforced frame
- Permanent ventilation : For constant exchange of air
- Opening system : With handy handwheel
Specifications
- Mosquito net
- Fibreglass as standard
- Supply voltage: 12V
- Minimum feeding tension: 8V
- Maximum supply voltage: 16V
- Max electric input: 3 A
- Power consumption: 36W
- Minimum absorption: 0.3A
- Maximum air flow: 35m³/min
- Fan diameter : 30 cm
- Permanent air flow: 80 cm2
- Weight : 4,6 kg
Associated ProductsFiamma Turbo Vent Roolight Range
| Description |
Turbo-Vent Premium White |
Turbo-Vent Premium Crystal |
Turbo-Vent White |
Turbo-Vent Crystal |
| Colours |
White |
Crystal |
White |
Crystal |
| 12V Motor |
|
|
|
|
| Polar Control Thermostat |
|
|
- |
- |
| Touch control |
|
|
- |
- |
| Fan Speed |
Variable |
Variable |
Variable |
Variable |
| Tension |
12 V |
12 V |
12 V |
12 V |
| Power |
36 W |
36 W |
36 W |
36 W |
| Min. electric input |
0,3 A |
0,2 A |
0,3 A |
0,3 A / 0,2 A |
| Max electric input |
3 A |
3 A |
3 A |
3 A |
| Max flow l/min. at 0 bar |
35 m3/min |
35 m3/min |
35 m3/min |
35 m3/min |
| Fan diameter |
30 cm |
30 cm |
30 cm |
300 mm |
| Permanent air flow |
80 cm2 |
80 cm2 |
80 cm2 |
80 cm2 |
| Weight |
4,6 kg |
4,6 kg |
4,6 kg |
4,6 kg |
| Certificates |
ABE 19330 E24 10R-030530 |
ABE 19330 E24 10R-030530 |
ABE 19330 E24 10R-030530 |
ABE 19330 E24 10R-030530 |
Frequently Asked Questions
The Turbo-Vent Premium accommodates roof thicknesses from 30mm to 85mm as standard. The reinforced frame design allows installation without additional extension kits across this range. You'll need a square cutout of 390 x 390mm in your roof, and the unit's external dimensions are 455 x 455mm with a height of 85mm above the roofline.
The rooflight connects directly to your leisure battery at 12V DC only, never to 220V mains supply. Installation requires running cables from your battery to the rooflight location, with the unit drawing between 0.3A at minimum speed and 3A at maximum. The touch control panel provides simple operation once the electrical connection is established. Professional installation is recommended to ensure proper sealing and electrical safety.
The Premium version features touch control operation with multicolour LED status indicators, whilst the standard Turbo-Vent uses analogue switches. Both include the Polar Control thermostat function and identical 10-blade fan performance. The Premium's electronic interface includes acceleration ramps that gradually adjust fan speeds, which helps preserve motor life and reduces strain on your vehicle's electrical system. The touch controls provide a more modern appearance and simplified operation compared to traditional switches.
The Turbo-Vent Premium's reinforced frame is designed for replacement installations and fits apertures from 36 x 36cm to 42 x 42cm, making it compatible with most older 40 x 40cm rooflights. This includes previous Fiamma models and many competitor rooflights in this size range. The external frame sits above the existing cutout, so minor variations in aperture size are accommodated. You'll need to verify your roof thickness falls within the 30-85mm range and arrange the 12V electrical connection if upgrading from a manual rooflight.
The Turbo-Vent Premium's electronic circuit allows rapid, problem-free reversal of the 10-blade fan's rotation direction. You control whether it draws fresh air into your motorhome or extracts stale air and odours through the touch control panel. The fan delivers up to 35 cubic metres of airflow per minute in either direction. The Polar Control thermostat function works in both modes, automatically managing ventilation based on your temperature preferences.
Fiamma recommends using butyl sealant, Sikalastomer-710, Therostat II, or Dekalin 1512 for installation. Apply a continuous bead with a minimum width of 30mm around the lower part of the external frame before securing it to the roof. After fixing the frame with the supplied 20 self-tapping screws, carefully seal the entire perimeter, filling any gaps between the roof and frame plus all screw heads. The combination of proper sealant and Fiamma's patented rubber seal ensures a watertight installation.
The Polar Control thermostat reduces power consumption by up to 50% compared to manual operation by automatically switching the fan on and off based on temperature differential. When you set your desired temperature, the fan runs only until that temperature is reached, then stops until needed again. Setting the control to the minimum differential of 1°C once comfortable temperature is achieved maximises battery life whilst maintaining your preferred interior climate. This makes the Premium particularly suitable for off-grid camping where power conservation matters.
The crystal finish allows natural light to enter through the tinted cover whilst maintaining UV protection and privacy. The white finish blocks direct sunlight completely, which makes it preferable for sleeping areas or when you want maximum light control. Both versions include the same motorised fan, Polar Control function, and permanent ventilation features. The crystal cover is manufactured from UV-resistant polycarbonate, whilst both options feature Fiamma's aerodynamic design that eliminates the need for an external spoiler.
-77665.webp)
Fiamma Rollo Vent 40 Roller Blind
(3 reviews)
Loading shipping details...
-27212_xlge.jpg)
